The Ring Size Guide
PRINT YOUR OWN
STEP ONE: PRINT
- Before you print this page to use it as a size guide, make sure that the option for scaling in your Print Options Box is set to "none" or "no page scaling."
- After you print this page, use a ruler to measure the dotted line and the end to verify that your ruler measurement and the printed measurement are the same.
- If the measurement is off, double-check that you are printing this guide at full size on your printer, make any corrections, and repeat until correct.
STEP TWO: CUT
- Use scissors to cut a slit along the dotted line. Slide the end through the slit and tighten to wrap around your finger with the numbers facing outwards.
- The numbers on the strip should be exact measurements to the chart above.
- If the ring falls between two sizes, order the next size up.
STEP THREE: MEASURE
- Use the drop-down ring sizing feature on the item description page to select the correct ring size.
- The ring size you selected will then be indicated when you view your selection in your Cart before completing your order.
RING SIZE to MILLIMETER CONVERSION TABLE
| 1 | 39.1mm |
| 1.5 | 40.2mm |
| 2 | 41.5mm |
| 2.5 | 42.7mm |
| 3 | 44mm |
| 3.5 | 45.2mm |
| 4 | 46.5mm |
| 4.5 | 47.8mm |
| 5 | 49.0mm |
| 5.5 | 50.2mm |
| 6 | 51.5mm |
| 6.5 | 52.8mm |
| 7 | 54.0mm |
| 7.5 | 55.3mm |
| 8 | 56.6mm |
| 8.5 | 57.8mm |
| 9 | 59.1mm |
| 9.5 | 60.3mm |
| 10 | 61.6mm |
| 10.5 | 62.8mm |
| 11 | 64.1mm |
| 11.5 | 66.0mm |
| 12 | 67.3mm |
PRINT THESE SIZES AND OUR RING SIZER IN THE PDF PROVIDED
*If you don't have printer use a strip of paper to wrap around your finger, mark with a pencil or pen, and measure with a ruler to get your ring size.